Our Referb Process:

Here is a detailed list of work that is done in our typical refurbishing process.

·        Repair or Replace bad circuit boards and rebuild bad connectors as necessary.

·         Replace backbox bulbs and clean the backboard.

·         Clean translite and translite glass

·         Replace translite trim as necessary.

·         Cabinet vacuumed, outside of cabinet cleaned and inspected for any issues

·         Fuses are checked and correct fuse values are installed (safety issue to prevent damage to the game or a fire)

·         Clean lamp boards and replace bulbs.

·         Reflow lamp board connections.

·         Replace or re-weld broken scoops.

·         Locks with keys for full access inside the machine

·         All coils and mechanisms are checked, adjusted, or replaced

·         Do full playfield teardown and cleaning

·         Sonic Clean or Replace star posts as necessary

·         Clean plastics, ramps, etc., and reassemble.

·         Install new balls.

·         Install new flipper buttons if needed

·         Refresh or Rebuild flippers

·         Clean and wax the entire playfield.

·         Replace all the playfield rubber.

·         Upgrade to LED lighting

·         Repair or Replace adjustable feet

          All switches are checked, adjusted or replaced

         All coils and mechanisms are checked, adjusted or replaced

         Locks with keys for full access inside the machine

        Do thorough playtesting and make necessary adjustments.

​